Maybe someone can help me. I need my mappack in .XDF for Tunerpro.
I have a WINOLS 5 .kp.
Do somebody have the plugin from EVC for XDF or any other tool to convert?
Hi all,
Can anyone help me with PIN for Delphi radio for IVECO Daily 2019 ? There is no option to get it by serial. I believe that PIN is stored in BGA Flash memory. I was able to read it so maybe somone here can help mi with that ?
Flash is 32 Mbytes so I put in on mega and attach link.
Hey guys, I recently broke the original ECU on a w204 C180 2014. Luckily I had a full backup of the flash and eeprom using foxflash, bought a junkyard ecu with the same parts number, flashed it but the backup does not include coding or programming data of the original ecu now the car wont start and has fault codes like ecu/tcm mismatch, anti theft protection in the radio and so on...
Can somebody tell me how I can fix this? I have C4 and Vediamo/Monaco/Xentry.
I am also willing to pay if you can help fix this!
Hello. I have a 2005 BMW E61, which was originally equipped with a CCC system, but it was retrofitted with CIC. How is the update process for this map going? I saw that the person who installed it updated it via USB.
The other is, can you play a video if I copy it to your hard drive?
Could you suggest a device and software for coding a Nissan GTR (mine is 2015 model). I got one recently and will be coding some new modules etc. I will need basically to access to every single module in the car.
I have a polo 6R year or manufacture 2009.
We replaced the cluster as the original stopped working, then tried to read the eeprom to copy the data to the new unit but i found out that the data is corrupted.
I need your help in rebuilding the values needed.
Recently i here some here the eeprom dump from the ecu to get the CS key, MAC and pin.
I have then pasted them on the new cluster using svci.
I then tried to make the keys but couldnt make the originals with svci, so i read the keys with xhorse keytoolmax and inputted the values direcly, i was also able to make new transponders and then used svci to automatically register them which worked ok.
Car is not starting and showing immobilizer fault.
I have attached the photos of the values in svci and the ecu eeprom. could someone please confirm or guide me to the right direction if im missing something.
Problem is OCP not working and SOS error along with general Light malfunction on dashboard
Errors in Launch Diagnostic are:
B22E34A
U016987
U021387
Car was crashed and had no rain/light sensor (wires were cut)
We mounted the rain/light sensor and it seems that it is working but errors related to it are still there.
We also bought a used OCP but still no light on the panel and communication error.
Tested voltage to the module and it’s 12 volts so it’s getting power from ecu
How can we code the new OCP panel to the car?
We have Launch Diagnostics and Autel
Hi guys, I have a problem with this car, it won't start, DTC code P1615. Does anyone have any experience with this car? What could it be? I think it's a synchronization issue. Thanks and regards.
![[Image: 2896f128f7c756d8663fd8340f33290a.jpg]](https://uploads.tapatalk-cdn.com/20241128/2896f128f7c756d8663fd8340f33290a.jpg)
![[Image: 319643f1aa2f17194a16195607336eff.jpg]](https://uploads.tapatalk-cdn.com/20241128/319643f1aa2f17194a16195607336eff.jpg)
